股票 · 全球 · 股票，ETF · 每月 Free

结合智能因子动量与市场组合

登录后收藏

学术论文

主动还是被动：智能因子、市场组合，还是二者兼用？

作者Matus Padysak

机构

Comenius University Bratislava
Comenius University - Faculty of Mathematics, Physics and Informatics
Quantpedia.com

论文链接https://papers.ssrn.com/sol3/papers.cfm?abstract_id=3745517

导读

投资标的：IWM、BIL。再平衡：每月。Universe: IWM, BIL. Parameters: rebalance=monthly.

策略概要

该策略投资于Alpha Architect因子投资数据库中的因子（价值、质量、动量、规模和波动等主要风格），标的基于美国市值最大的1500只股票。先为每个因子构建快信号（过去1个月收益）和慢信号（过去12个月收益）；按信号绝对值做横截面排名，个股权重=对应排名/全部排名之和再乘以信号符号（论文式3和式4）。动态混合策略中，每个因子最终权重为快信号权重的四分之三加慢信号权重的四分之一（式12）。再将这1500只股票视为市场组合，用过去十二个月、十二条收益均线比较主动投资（因子动量）与市场：若因子动量均线更高则主动得1分，否则市场得1分，从而按“获胜”均线数量确定权重（式13和式14）。每月再平衡。

经济逻辑

因子策略与因子动量（时间序列与横截面）均有大量学术支持。因子动量还能缓解错误分组导致的因子失效（例如成长跑赢价值、大盘跑赢小盘）。慢信号对趋势变化反应迟钝，快信号又易误报，因此需要按信号互动调整权重。尽管主动因子策略显著优于朴素等权，它仍可能大幅落后市场；但主动因子与市场显著负相关，二者结合可取长补短。回测显示，用均线动态混合的组合收益最高、波动与回撤最低，收益分布也更有利。

入场与出场

入场

每月检查 IWM, BIL。收盘价高于 200 日均线的标的等权做多；若无一合格则空仓。空仓（目标权重为空字典）等于 100% 现金。

出场

下一再平衡日收盘价跌破 200 日均线即剔除该标的。全部跌破均线时组合转为现金。引擎按 5 bps 佣金 + 2 bps 滑点成交。

所需行情数据

需要 IWM, BIL 至少 200 根复权收盘价，才能形成第一个有效信号。ETF 仅交易日有行情。实验室通过 backtest.data.load_daily_prices 读取 Yahoo Finance。

标的

IWM, BIL

频率

每月 · 日频复权收盘价；信号按月再平衡（用当月最后一个有效交易日）

所需历史

每个标的至少 200 根交易日 K 线（约 10 个交易月），外加数根缓冲才能发出第一个信号。

字段

复权收盘价（Adj Close / auto_adjust Close）
交易日日期索引

凭证

回测与实验室：无需密钥
实盘下单才需要券商 / 交易所 API

API 与数据源

Quant Buffet 数据 API

实验室用 load_daily_prices 拉取 ASSETS 的复权收盘价面板，磁盘缓存后回测可复现。

提供方: backtest.data.load_daily_prices
鉴权: 回测无需密钥
接口: load_daily_prices(ASSETS, start="2000-01-01")

API / docs → /zh/docs/data-api

Yahoo Finance（yfinance）

美股 / ETF 复权 OHLCV，免费研究接口，有速率限制。

提供方: yfinance → Yahoo Finance
鉴权: 公开历史无需密钥
接口: Ticker.history / yf.download(auto_adjust=True)

API / docs → github.com/ranaroussi/yfinance

Onsite backtest IDE

Quant Buffet 原生回测 IDE

Edit and run Quant Buffet Python for 结合智能因子动量与市场组合 in the browser. Results update live with equity, drawdown, and metrics charts. Allowed: backtest.data, backtest.engine, backtest.metrics, numpy, pandas. Define ASSETS and make_on_day(prices). Shortcut: Ctrl+Enter. API docs →

IDE · 40 lines

"""
Quant Buffet interactive lab — 结合智能因子动量与市场组合
Allowed: backtest.data / backtest.engine / backtest.metrics, numpy, pandas.
Required: a module-level ASSETS list, and def make_on_day(prices) returning (on_day, ready)
"""
from __future__ import annotations

import numpy as np
import pandas as pd

from backtest.data import load_daily_prices
from backtest.engine import EngineConfig, PortfolioEngine
from backtest.metrics import compute_metrics

ASSETS = ['IWM', 'BIL']
SMA_DAYS = 200

def make_on_day(prices: pd.DataFrame):
    cols = [c for c in ASSETS if c in prices.columns]
    sma = prices[cols].rolling(SMA_DAYS, min_periods=SMA_DAYS).mean()
    state = {"last": None}

    def on_day(engine: PortfolioEngine, dt: pd.Timestamp) -> None:
        if sma.loc[dt].isna().all():
            return
        key = (dt.year, dt.month)
        if state["last"] == key:
            return
        state["last"] = key
        long = [
            s for s in cols
            if pd.notna(prices.at[dt, s]) and pd.notna(sma.at[dt, s])
            and prices.at[dt, s] > sma.at[dt, s]
        ]
        w = {} if not long else {s: 1.0 / len(long) for s in long}
        engine.set_target_weights(dt, w)

    ready = sma.dropna(how="all").index.min() if sma.notna().any().any() else None
    return on_day, ready

"""
Quant Buffet interactive lab — 结合智能因子动量与市场组合
Allowed: backtest.data / backtest.engine / backtest.metrics, numpy, pandas.
Required: a module-level ASSETS list, and def make_on_day(prices) returning (on_day, ready)
"""
from __future__ import annotations

import numpy as np
import pandas as pd

from backtest.data import load_daily_prices
from backtest.engine import EngineConfig, PortfolioEngine
from backtest.metrics import compute_metrics

ASSETS = ['IWM', 'BIL']
SMA_DAYS = 200

def make_on_day(prices: pd.DataFrame):
    cols = [c for c in ASSETS if c in prices.columns]
    sma = prices[cols].rolling(SMA_DAYS, min_periods=SMA_DAYS).mean()
    state = {"last": None}

def on_day(engine: PortfolioEngine, dt: pd.Timestamp) -> None:
        if sma.loc[dt].isna().all():
            return
        key = (dt.year, dt.month)
        if state["last"] == key:
            return
        state["last"] = key
        long = [
            s for s in cols
            if pd.notna(prices.at[dt, s]) and pd.notna(sma.at[dt, s])
            and prices.at[dt, s] > sma.at[dt, s]
        ]
        w = {} if not long else {s: 1.0 / len(long) for s in long}
        engine.set_target_weights(dt, w)

ready = sma.dropna(how="all").index.min() if sma.notna().any().any() else None
    return on_day, ready

Quant Buffet syntax cheat sheet (copy / insert)

Paste these fragments into the editor. The sandbox rejects QuantConnect, os, and network libraries.

Required imports

Only these libraries are allowed in the sandbox.

from __future__ import annotations

import numpy as np
import pandas as pd

from backtest.data import load_daily_prices
from backtest.engine import EngineConfig, PortfolioEngine
from backtest.metrics import compute_metrics

ASSETS list (whitelisted ETFs)

Module-level list. Tickers must be in the Quant Buffet whitelist.

ASSETS = ["SPY", "QQQ", "TLT", "GLD", "BIL"]

make_on_day contract

Must return (on_day, ready). on_day calls engine.set_target_weights.

def make_on_day(prices: pd.DataFrame):
    cols = [c for c in ASSETS if c in prices.columns]
    sma = prices[cols].rolling(200, min_periods=200).mean()
    state = {"last": None}

    def on_day(engine: PortfolioEngine, dt: pd.Timestamp) -> None:
        if sma.loc[dt].isna().all():
            return
        key = (dt.year, dt.month)
        if state["last"] == key:
            return
        state["last"] = key
        long = [
            s for s in cols
            if pd.notna(prices.at[dt, s]) and pd.notna(sma.at[dt, s])
            and prices.at[dt, s] > sma.at[dt, s]
        ]
        weights = {} if not long else {s: 1.0 / len(long) for s in long}
        engine.set_target_weights(dt, weights)

    ready = sma.dropna(how="all").index.min() if sma.notna().any().any() else None
    return on_day, ready

Set target weights

Weights should sum to about 1.0. Empty dict = 100% cash.

engine.set_target_weights(dt, {"SPY": 0.60, "BIL": 0.40})

Live backtest performance

CAGR

3.82%

Sharpe

0.36

Max DD

-23.91%

Vol

12.55%

Sortino

0.55

Beta

0.32

Up days

58%

Run the backtest to populate charts.

Order records

Run the backtest to load every order fill alongside performance.

Export to your platform

Transform Quant Buffet lab code (ASSETS + make_on_day / PortfolioEngine) into native classes for a third-party IDE — then copy and paste.

Target platform

Run in: QuantConnect Cloud or LEAN CLI · QCAlgorithm with Equity securities and monthly rebalance.

Detected pattern: SMA trendAssets: IWM, BIL

# Generated from Quant Buffet → QuantConnect LEAN
# Strategy: 结合智能因子动量与市场组合
# Detected pattern: SMA trend
# Source uses Quant Buffet lab APIs (ASSETS + make_on_day / PortfolioEngine).
# Review fees, data, and risk before live trading — educational export only.

from AlgorithmImports import *


class QuantBuffetExport(QCAlgorithm):
    def Initialize(self):
        self.SetStartDate(2010, 1, 1)
        self.SetCash(100000)
        tickers = ["IWM", "BIL"]
        self.symbols = []
        for t in tickers:
            if "-" in t:  # crypto proxy e.g. BTC-USD
                self.symbols.append(self.AddCrypto(t.replace("-USD", ""), Resolution.Daily).Symbol)
            else:
                self.symbols.append(self.AddEquity(t, Resolution.Daily).Symbol)
        self.Schedule.On(
            self.DateRules.MonthStart(self.symbols[0]),
            self.TimeRules.AfterMarketOpen(self.symbols[0], 30),
            self.Rebalance,
        )
        # Logic: Long assets where close > SMA(200); equal-weight; monthly.

    def Rebalance(self):
        longs = []
        for symbol in self.symbols:
            hist = self.History(symbol, 200 + 5, Resolution.Daily)
            if hist.empty: continue
            close = hist["close"].unstack(level=0).iloc[:, 0] if hasattr(hist["close"], "unstack") else hist["close"]
            if len(close) < 200: continue
            if float(close.iloc[-1]) > float(close.iloc[-200:].mean()):
                longs.append(symbol)
        weight = 1.0 / len(longs) if longs else 0.0
        for symbol in self.symbols:
            self.SetHoldings(symbol, weight if symbol in longs else 0.0)

导出代码使用目标平台的原生类与库。请在第三方 IDE 中安装依赖后运行；实盘前请自行验证。